Tekniset tiedot:
Limited delivery pressure [bar]: 8,4 +/-0,2
Limited delivery pressure [bar]: 5,5 +/-0,15
Opposite handed version: K012204N00
Delivery Port 1: 3/8-18 NPTF (Female)
Limited delivery pressure [bar]: 5,6 +0,2
Has opposite handed version: K003857
Has opposite handed version: II35838AT
With Integral Supply Dump: Yes
Body Type: 90°
Air Inlet port(s) size: 37,1/34,9x17,5

Tekniset tiedot:
Pilot Trip Pressure: 18 PSI
Body Mounting: 3/8-16 UNC-2B (4x)
Tractor Control Port (Primary): 3/8-18 NPT
With integrated Line Filter: not relevant
Lever offset [mm]: Right 18
Lower Mounting Bracket: .41 IN x 1.15 IN Slot (2x)
Mounting studs length /
holes depth: 20
Pedal Material: Cast Aluminum
Delivery Port: 1/4-18 NPT
Customer part number: 03080009620
Opening pressure [bar]: 7,0
Outside Diameter [mm]: 301
TMC Washer: RV075
Terminal Post Size: #10-32 UNF-2A (2x)
Unloader cut-in pressure [bar]: 11,0
Power Harness Connector Type:
Weather Pack 2-Way Sealed Connector (Female)
Tube diameter [mm] measure D: 9
Additional description: T22/24HF
Arm Offset: 1.50 IN (Right Hand)
Circuit 4 - Open/close pressure [bar]: 7,5
Customer part number: 0501 008 891
Unloader cut-out pressure [bar]: 12,5+/-0,2
Used for: disassembly front axle of K253817N50
Cautionary Note(s):
Do not replace PG cartridge with Standard/GC cartridge.

Tekniset tiedot:
Pilot Trip Pressure: 18 PSI
Body Mounting: 3/8-16 UNC-2B (4x)
Tractor Control Port (Primary): 3/8-18 NPT
Lower Mounting Bracket Angle (CCW from SUP): Loose in Box
Lever offset [mm]: Right 18
Lower Mounting Bracket: .41 IN x 1.15 IN Slot (2x)
Pedal Material: Cast Aluminum
Delivery Port: 1/4-18 NPT
Customer part number: 03080009620
Opening pressure [bar]: 7,0
Outside Diameter [mm]: 301
TMC Washer: RV075
Terminal Post Size: #10-32 UNF-2A (2x)
Unloader cut-in pressure [bar]: 11,0
Power Harness Connector Type:
Weather Pack 2-Way Sealed Connector (Female)
Tube diameter [mm] measure D: 9
Brake type: Axial
Arm Offset: 1.50 IN (Right Hand)
Circuit 4 - Open/close pressure [bar]: 7,5
Customer part number: 0501 008 891
Unloader cut-out pressure [bar]: 12,5+/-0,2
Used for: disassembly front axle of K253817N50

Tekniset tiedot:
Limited delivery pressure [bar]: 8,4 +/-0,2
Supply Port 1: 1/2-14 NPT (Male)
Opposite handed version: K012204N00
Oil supply port size: Ø16,3mm H11
Limited delivery pressure [bar]: 5,6 +0,2
Has opposite handed version: K003857
Has opposite handed version: II35838AT
With Integral Supply Dump: Yes
Cable Length L1 [mm]: 11000
Air Inlet port(s) size: 37,1/34,9x17,5