Tekniset tiedot:
Air Dryer Type: Stand-Alone
Mounting: Mount to Purge Reservoir (Not Included)
Supply Port: 1/2-14 NPT
Governor Unloader Port:
1/8-27 NPT x 1/4 Tube (Compression / 90° Elbow)
Governor Reservoir Port: 1/8-27 NPT (Plugged)
PRI Delivery Port 21: 1/4-18 NPT
PRI Delivery Opening Pressure: 106 PSI
SEC Delivery Port 22: 1/4-18 NPT
SEC Delivery Opening Pressure: 106 PSI
AUX 1 Delivery Port 1: 1/4-18 NPT
AUX 1 Delivery Port 2: 1/4-18 NPT
AUX 1 Delivery Port 3: 1/4-18 NPT
AUX 1 Delivery Port 4: 1/4-18 NPT
AUX 1 Delivery Opening Pressure: 106 PSI
AUX 2 Delivery Port: 1/4-18 NPT
AUX 2 Delivery Opening Pressure: 106 PSI
Purge Exhaust Port: Standard
Purge Valve Type: Hard Seat
Safety Valve Opening Pressure: 153 PSI
Heater / Thermostat Rating: 12V / 90W
Heater Connector Type:
Metri-Pack 280 Series 2-Way Sealed Connector (Male)
Heater Connector Color: White
Cartridge Type: Standard
Cartridge Thread: M39 x 1.5-6H RH
Clearance to Remove Cartridge: 1.00 IN
Governor Included: Yes
Governor Type: Non-Adjustable
Cut-in Pressure: 110 PSI
Cut-out Pressure: 130 PSI
Pressure Protection Valve Configuration: 4 in Parallel
Maximum Inlet Temperature: 160 °F (71 °C)
Minimum Operating Temperature: -40 °F (-40 °C)
Cautionary Note(s):
Pressure protection valve configs are not interchangeable.

Tekniset tiedot:
Air Dryer Type: Stand-Alone
Mounting: Mount to Purge Reservoir (Not Included)
Supply Port: 1/2-14 NPT
Governor Unloader Port:
1/8-27 NPT x 1/4 Tube (Compression / 90° Elbow)
Governor Reservoir Port: 1/8-27 NPT (Plugged)
PRI Delivery Port 21: 1/4-18 NPT
PRI Delivery Opening Pressure: 106 PSI
SEC Delivery Port 22: 1/4-18 NPT
SEC Delivery Opening Pressure: 106 PSI
AUX 1 Delivery Port 1: 1/4-18 NPT
AUX 1 Delivery Port 2: 1/4-18 NPT
AUX 1 Delivery Port 3: 1/4-18 NPT
AUX 1 Delivery Port 4: 1/4-18 NPT
AUX 1 Delivery Opening Pressure: 106 PSI
AUX 2 Delivery Port: 1/4-18 NPT
AUX 2 Delivery Opening Pressure: 106 PSI
Purge Exhaust Port: Standard
Purge Valve Type: Hard Seat
Safety Valve Opening Pressure: 153 PSI
Heater / Thermostat Rating: 24V / 90W
Heater Connector Type:
Metri-Pack 280 Series 2-Way Sealed Connector (Male)
Heater Connector Color: Gray
Cartridge Type: Standard
Cartridge Thread: M39 x 1.5-6H RH
Clearance to Remove Cartridge: 1.00 IN
Governor Included: Yes
Governor Type: Non-Adjustable
Cut-in Pressure: 110 PSI
Cut-out Pressure: 130 PSI
Pressure Protection Valve Configuration: 4 in Parallel
Maximum Inlet Temperature: 160 °F (71 °C)
Minimum Operating Temperature: -40 °F (-40 °C)
Cautionary Note(s):
Pressure protection valve configs are not interchangeable.

Tekniset tiedot:
Air Dryer Type: Stand-Alone
Mounting: Mount to Purge Reservoir (Not Included)
Supply Port: 1/2-14 NPT
Governor Unloader Port: 1/8-27 NPT
Governor Reservoir Port: 1/8-27 NPT (Plugged)
PRI Delivery Port 21: 1/4-18 NPT
PRI Delivery Opening Pressure: 103 PSI
SEC Delivery Port 22: 1/4-18 NPT
SEC Delivery Opening Pressure: 109 PSI
AUX 1 Delivery Port 1: 1/4-18 NPT (Plugged)
AUX 1 Delivery Port 2: 1/4-18 NPT
AUX 1 Delivery Port 3: 1/4-18 NPT
AUX 1 Delivery Port 4: 1/4-18 NPT
AUX 1 Delivery Opening Pressure: 109 PSI
AUX 2 Delivery Port: 1/4-18 NPT
AUX 2 Delivery Opening Pressure: 109 PSI
Purge Exhaust Port: Standard
Purge Valve Type: Hard Seat
Safety Valve Opening Pressure: 153 PSI
Heater / Thermostat Rating: 12V / 90W
Heater Connector Type:
Metri-Pack 280 Series 2-Way Sealed Connector (Male)
Heater Connector Color: White
Cartridge Type: PuraGuard (Coalescing)
Cartridge Thread: M39 x 1.5-6H RH
Clearance to Remove Cartridge: 1.00 IN
Governor Included: Yes
Governor Type: Non-Adjustable
Cut-in Pressure: 110 PSI
Cut-out Pressure: 130 PSI
Pressure Protection Valve Configuration: 4 in Parallel
Maximum Inlet Temperature: 160 °F (71 °C)
Minimum Operating Temperature: -40 °F (-40 °C)
Cautionary Note(s):
Pressure protection valve configs are not interchangeable.

Tekniset tiedot:
Air Dryer Type: Stand-Alone
Body Mounting: 1/2-13 UNC-2B (3x)
Lower Mounting Bracket: 1/2-13 UNC-2B (3X) - Flange Mount
Supply Port: 1/2-14 NPT
Control Port: 1/4-18 NPT
Delivery Port 1: 1/2-14 NPT
Purge Exhaust Port: Standard
Remote Purge Port: 1/4-18 NPT
Purge Valve Type: Soft Seat
Purge Volume: System Air - Customer Defined
Heater / Thermostat Rating: 24V / 90W
Heater Connector Type:
Metri-Pack 280 Series 2-Way Sealed Connector (Male)
Heater Connector Color: Gray
Cartridge Type: Standard
Cartridge Thread: M39 x 1.5-6H RH
Clearance to Remove Cartridge: 1.00 IN
Turbo Cut-off Function: Yes
Maximum Inlet Temperature: 150 °F (66 °C)
Minimum Operating Temperature: -40 °F (-40 °C)

Tekniset tiedot:
Air Dryer Type: Alpha
Mounting: Mount to Purge Reservoir (Not Included)
Supply Port: 1/2-14 NPT
Governor Unloader Port: 1/8-27 NPT
Governor Reservoir Port: 3/8-18 NPT
PRI Delivery Port 21: 1/4-18 NPT
PRI Delivery Opening Pressure: 103 PSI
SEC Delivery Port 22: 1/4-18 NPT
SEC Delivery Opening Pressure: 103 PSI
AUX 1 Delivery Port 1: 1/4-18 NPT
AUX 1 Delivery Port 2: 1/4-18 NPT
AUX 1 Delivery Port 3: 1/4-18 NPT
AUX 1 Delivery Port 4: 1/4-18 NPT
AUX 1 Delivery Opening Pressure: 103 PSI
AUX 2 Delivery Port: 1/4-18 NPT
AUX 2 Delivery Opening Pressure: 109 PSI
Purge Exhaust Port: Standard
Purge Valve Type: Soft Seat
Safety Valve Opening Pressure: 153 PSI
Heater / Thermostat Rating: 24V / 90W
Heater Connector Type:
Metri-Pack 280 Series 2-Way Sealed Connector (Male)
Heater Connector Color: Gray
Cartridge Type: Standard
Cartridge Thread: M39 x 1.5-6H RH
Clearance to Remove Cartridge: 1.00 IN
Governor Included: No
Pressure Protection Valve Configuration: 4 in Parallel
Maximum Inlet Temperature: 160 °F (71 °C)
Minimum Operating Temperature: -40 °F (-40 °C)
Cautionary Note(s):
Pressure protection valve configs are not interchangeable.

Tekniset tiedot:
Air Dryer Type: Stand-Alone
Mounting: Mount to Purge Reservoir (Not Included)
Supply Port: 1/2-14 NPT
Governor Unloader Port: 1/8-27 NPT x 1/4 PTC (Straight)
Governor Reservoir Port: 1/8-27 NPT (Plugged)
PRI Delivery Port 21: 1/4-18 NPT x 3/8 PTC (Straight)
PRI Delivery Opening Pressure: 103 PSI
SEC Delivery Port 22: 1/4-18 NPT (Plugged)
Purge Exhaust Port: Standard
Purge Valve Type: Hard Seat
Safety Valve Opening Pressure: 153 PSI
Heater / Thermostat Rating: 12V / 90W
Heater Connector Type:
Metri-Pack 280 Series 2-Way Sealed Connector (Male)
Heater Connector Color: White
Cartridge Type: Standard
Cartridge Thread: M39 x 1.5-6H RH
Clearance to Remove Cartridge: 1.00 IN
Governor Included: Yes
Governor Type: Non-Adjustable
Cut-in Pressure: 110 PSI
Cut-out Pressure: 130 PSI
Pressure Protection Valve Configuration: 2 in Series
Maximum Inlet Temperature: 160 °F (71 °C)
Minimum Operating Temperature: -40 °F (-40 °C)
Cautionary Note(s):
Pressure protection valve configs are not interchangeable.

Tekniset tiedot:
Mounting: .676 IN x .40 IN (4x)
Air Dryer Configuration: AD-IS / AD-IS (EverFlow)
Supply Port: 1/2-14 NPT X 1/2-14 NPT (Street Tee)
Governor Unloader Port: 3/8-18 NPT x 1/2 PTC (45° Elbow)
Governor Reservoir Port (Remote Charge):
1/8-27 NPT x 1/4 Tube (Compression / 90° Elbow)
Governor Control Port:
1/8-27 NPT X 1/4 Tube (Compression / Straight)
SEC Reservoir Port:
1/8-27 NPT X 1/4-18 NPT (90° Elbow / Extended)
PRI Delivery (Reservoir) Port: 1/4-18 NPT
PRI Delivery Opening Pressure: 103 PSI
SEC Delivery (Reservoir) Port: 1/4-18 NPT
SEC Delivery Opening Pressure: 109 PSI
AUX 1 Delivery Port 1: 1/4-18 NPT
AUX 1 Delivery Port 2: 1/4-18 NPT
AUX 1 Delivery Port 3: 1/4-18 NPT
AUX 1 Delivery Port 4: 1/4-18 NPT
AUX 1 Delivery Opening Pressure: 109 PSI
AUX 2 Delivery Port: 1/4-18 NPT
AUX 2 Delivery Opening Pressure: 109 PSI
Purge Exhaust Port: Standard
Purge Volume: Standard
Purge Valve Type: Soft Seat
Safety Valve Opening Pressure: 153 PSI
Power Harness Connector Type:
Weather Pack 2-Way Sealed Connector (Female)
Heater / Thermostat Rating: 24V / 90W
Heater Connector Type:
Metri-Pack 280 Series 2-Way Sealed Connector (Male)
Heater Connector Color: Gray
Cartridge Type: Standard
Cartridge Thread: M39 x 1.5-6H RH
Clearance to Remove Cartridge: 1.00 IN
Governor Included: Yes
Governor Type: Non-Adjustable
Cut-in Pressure: 105 PSI
Cut-out Pressure: 130 PSI
Maximum Inlet Temperature: 160 °F (71 °C)
Minimum Operating Temperature: -40 °F (-40 °C)
Cautionary Note(s):
Do not replace PG cartridge with Standard/GC cartridge.

Tekniset tiedot:
Air Dryer Type: Stand-Alone
Body Mounting:
Ø .425 Hole with 3/8-24 UNF-2A Bolted Joint (8x)
Lower Mounting Bracket: .41 IN x 1.15 IN Slot (2x)
Lower Mounting Bracket Angle (CCW from SUP): Loose in Box
Upper Mounting Type: Strap (Stainless Steel)
Upper Mounting Bracket: .39 IN x 1.15 IN Slot (2x)
Upper Mounting Bracket Angle (CCW from SUP): Loose in Box
Upper Mounting Bracket Height (from Lower Mounting Bracket):
Loose in Box
Supply Port: 1/2-14 NPT
Control Port: 1/4-18 NPT
Delivery Port 1: 1/2-14 NPT
Purge Exhaust Port: Open
Purge Valve Type: Hard Seat
Purge Volume: Standard
Safety Valve Opening Pressure: 200 PSI
Heater / Thermostat Rating: 12V / 75W
Heater Connector Type:
Metri-Pack 280 Series 2-Way Sealed Connector (Male)
Heater Connector Color: White
Cartridge Type: Standard
Cartridge Thread: 5/8-11 UNC-2A
Cartridge Stabilizer Ring Included: No
Clearance to Remove Cartridge: 11.00 IN
Governor Included: No
Remote Fill Feature: 1/8-27 NPT
Maximum Inlet Temperature: 160 °F (71 °C)
Minimum Operating Temperature: -40 °F (-40 °C)