Tekniset tiedot:
Length [mm] measure L2: 28
Length max. loaded [mm] measure E: 27.03
Supplied with Port adaptors: no entry
Thread Size: 1-14 UNS
Has opposite handed version: K008172DC
Customer part number: JAS 02 104 015 01
To suit wheel size: 17,5"
Length [mm]: 2415
Length [mm]: 764

Tekniset tiedot:
Length [mm] measure L2: 28
Length max. loaded [mm] measure E: 27.03
Supplied with Port adaptors: no entry
Thread Size: 1-14 UNS
Has opposite handed version: K009174AT
Customer part number: JAS 02 104 015 01
To suit wheel size: 17,5"
Length [mm]: 2415
Width [mm]: 220.0

Tekniset tiedot:
Limited delivery pressure [bar]: 3,7 +/-0,2
Spring portion output force at 30 mm stroke [kN]: 11
Port 1 - Air Supply Interface: M16x1,5
Length [mm] measure L3: 21
Outside Diameter [mm]: 375
Length [mm] measure L3: 22
Has opposite handed version: K192155
Push rod thread length [mm]: 241

Tekniset tiedot:
Unloader cut-out pressure [bar]: 12,0 +/0,2
Unloader pressure control range [bar]: 0,8+0,6
Pressure range [bar]: 10 +0,2
Lube Fitting Position: 15°
Has opposite handed version: KB3915
Air Delivery port(s) size: R1/8"
Circuit 1 - Open/close pressure [bar]: 7-0,3
Circuit 2 - Open/close pressure [bar]: 7-0,3
Clearance to Remove Cartridge: 11.00 IN
Clevis / Yoke Style: Quick Connect (QC)
Circuit 3 - Open/close pressure [bar]: 7-0,3
Air Delivery port(s) size: Ø16,2
Electrical Connection: DIN72585 Bayonet
Clevis / Yoke Style: Not Included
Differential Pressure: 5 - 8 PSI
For internal hose diameter [mm]: 5
Effective length [mm]: 125/150±0,5
Flange angle [°]: radial 86°
Has opposite handed version: K192158
Customer part number: 81508046724
Customer part number: 81508046696
Pitch diameter [mm] measure B1: 18.7
Inner dimension 1: 038.10
Length [mm]: 2000±15
Predominance pressure [bar]: 1,0-1,3
Inshot pressure [bar]: 0.3
Predominance pressure [bar]: 0,5-0,8
Has opposite handed version: K014654AT
Has opposite handed version: K012276
Predominance pressure [bar]: 0,3-0,5
Rubber Boot Included: Yes
Mounting position: Horizontal
Outer dimension 1: 073.43
Number of pins: 4
Unloader cut-out pressure [bar]: 12,5 +/-0,5
Used for: disassembly front axle of K253817N50